• Skip to main content
  • Skip to footer

Steve Beeler

You have a goal…I have a way to get you there.

  • About Me
  • Project Management
  • Operations Engineering
  • Motorsports
  • FF50th
  • Blog

Simulation Output Reports

May 30, 2018 by stevebeeler

Discrete Event Simulation is a portal to the future: find constraints, test strategies to break them, improve performance to the goal, maximize investment returns, and reduce risk. Shown below are three powerful simulation output reports.

Simulation Output Reports

Time in State. Time in state simulation output reports are especially useful in finding the constraint in the process. Before the constraint, machine elements are generally blocked (blue) more than they are starved. After the constraint, they are starved (yellow) more than they are blocked. The machine element with the most uptime (green) is likely the constraint.  Knowledge of the constraint’s location is a key factor in improving the process. Focus on the constraint for opportunities to increase throughput. Look to non-constraints for opportunities to reduce operating costs.

Simulation Output Reports

Volume Histogram. The volume histogram is the first to two methods used to validate a simulation model against its real-world process. How production counts vary over time is an important metric…the less uncertainty the better.  The volume histogram provides a qualitative comparison of the hour-to-hour variation in volume throughput.

Simulation Output Reports

X-bar & R Chart. The production count X-bar & R chart provides a more quantitative comparison between the simulation and the real-world process. Statistical process control charts not only quantify the magnitude of the common cause process variation but also identify special cause events. Characterizing the output variation as common cause vs special cause is an important factor in validating the simulation model. It is difficult if not impossible to simulate special cause events. That is because discrete event simulation “engines” utilize constant probability random number streams. If the real-world process variation is being driven by non-random events, then the root causes of the special cause events will have to be removed before the simulation what-if results will predict future performance.

These three simulation output reports are the foundation for a Plan-Do-Check-Act continuous improvement of the simulated manufacturing or business process. Simulate, validate, and experiment. A robust solution will follow.

Share this post:

Share on TwitterShare on FacebookShare on PinterestShare on LinkedIn

Filed Under: Operations Engineering Tagged With: Continuous Improvement, Discrete Event Simulation, Plan-Do-Check-Act, Simulation Output Reports, Time In State, Volume Histogram, X-bar & R Chart

Footer

Find Success.

We can reach your goal. Contact me to start things off.

Get in Touch

  • LinkedIn
  • YouTube
  • About Me
  • Project Management
  • Operations Engineering
  • Motorsports
  • FF50th
  • Blog

Copyright © 2023 Steve Beeler · All Rights Reserved · Privacy Policy